About Corian
About Corian
Thank you for choosing Corian as an aesthetic decorative material that has durability and cleanliness. Corian manufacturing depends on proven technology being developed to resist the requirements of daily hard use.
Despite the high durability of the Corian as it is 12 mm thick and distinguished by a non-porous surface, it needs permanent care. Below we have listed some recommendations and cleaning, which will ensure that the value of your product remains
Cleaning
Clean the surface just using water and then dry it with a tissue or soft cloth. If these impurities are not removed, use a detergent without scraping after cleaning the surface with water and drying it.
Continuing pollution
Keep cleaning and hot water, clean cloth or tissue without scraping and grinding, washing powder (especially heavy detergents), liquid soap, or soap or hard. Remove the dirt with a cleaning agent solution, or allow it to absorb according to the degree of contamination, then wash it with clean water or a glass cleaner several times if necessary. Remove all traces of a cleaning agent, to prevent developing strips. This is done by using an absorbent cloth or paper towel to wipe dry surface.
The above procedures can be improved by a plastic cleaning sponge or a nylon brush
Pollution / stains
Corian is a non-porous, heterogeneous material, which is resistant to most household chemicals. But although liquids cannot penetrate the material, the spots must be erased immediately. Severe detergents, such as heavy duty detergents, metallic detergents, toilet cleaners, and oven cleaners should be avoided
You can follow the following steps to clean the corian.
Lime contamination
Clean with warm water and add 10% acetic acid or lemon if necessary. If industrial detergents are used, the surface should be washed with warm water.
• Wax residue
Wax residues should be removed initially using a plastic or wood spoon. But avoid scratching the surface! The remaining deposits can be leveled with blotting paper.
Soluble water dyes, paints, adhesives and dispersions
Fresh contamination can usually be cleaned with warm water. Either dry can be cleaned using solvents such as ethanol, acetone, gasoline or nail polish remover.
• Dye-based solvents, coatings and adhesives
Fresh contamination can usually be cleaned with solvents, either dry when necessary longer time after application. It is preferable to use suitable solvents that must be inquired about from pigment
2- The adhesive component
For example condensation resins (adhesive) on a base of formaldehyde, urea (forehead), melamine (middle), phenol (Fn) and resorcinol;
Reactive adhesives, shellac on base of epoxy resin, polyurethane (unsaturated polyester).
Pollution may not be removed from the ground surface after laminate hardening! The surface should be cleaned immediately with appropriate organic solvents, recommended by the adhesive supplier / varnish system.
• Sealing on a material or polysilicon base
Initially the waste must be mechanically removed with a spoon of plastic or wood. Surface scratch should be avoided! If necessary, residual sediments can be cleaned with silicone remover. Longer contact times with silicone remover can change the surface of the plastic wrap.
• Streaking after cleaning and solvent
It can be removed by cleaning it with hot water, drying it with clean, soft or absorbent household-type tissue paper
Chemical properties
In these recommendations, the focus is on providing resistance to high-pressure corian slices for chemicals and the possibilities arising from their application. Due to the presence of melamine resin slides that offer special offers, they have effective resistance to most chemicals, excellent mechanical properties, and high temperature resistance. Therefore, the compact can be used in cases where its surface will be exposed to the following: Chemicals used in laboratories and manufacturing industries - solvents Disinfectants Pigment - Bleaching agents -- makeup -- Medicines Corian has the ability to withstand the action of individual chemicals shown in section 4. We should note that they are carefully taken from all relevant recommendations and notes in this guide.
Application areas of high pressure decorative laminate sheets Korean offers an almost unlimited variety of decors and colors. Moreover, the material permits the establishment of numerous forms (for example, by subsequent formation or in the form of high pressure pressure plates) and also provides the possibility to cover large areas without gaps. This, in addition to high mechanical properties such as wear resistance, makes the compact compact suitable for erecting facilities in the following areas:.